7/28/2023 0 Comments Wol wake on lan wan android setupHere we have had to create two different rules because one is not normally allowed to do so. The second step is to open UDP port number 7 to that local IP, although there are some softwares that use TCP port 7. If you have set a fixed IP on the PC manually, it is not necessary to set the IP in this option, in addition, our recommendation is to use the Static DHCP of the router directly and not touch the IP configuration of the PCs. If we do not do this, when we try to access from the Internet, it will not know which of the computers on our network to make the request. That IP that we have assigned in the router or in TCP / IP is the one to which we have to open the ports. Then we click on the Power Management tab and configure like this: We go to the Network adapters section, we click the right mouse button.We write Device Manager and press enter.The first thing we are going to do is follow these steps: If the operating system is not compatible with WoL or we do not have it properly configured, we will not be able to use it. Configure the operating systemĪs we have already commented previously, not everything has to do with the hardware of our equipment. Finally, in modern equipment sometimes it is not necessary to configure anything and we can use Wake on WAN without having to touch anything, because it is already preconfigured at the factory. As each manufacturer names them differently, and also to access the BIOS / UEFI is different, it is advisable to consult the motherboard manual in case we have doubts. Other names they may receive are Wake on Lan, WOL, Remote Wake Up, and Wake on Magic Packet. There for it to work we had to activate the PCI Devices Power On and Ring-In Power On options. In the case of the BIOS that I have used it is called ACPI Configuration. The options that we must enable are usually found in a section called Power Management or similar, although it also receives other names. If we want to access the BIOS / UEFI of our computer as soon as we start it, it is usually accessed by pressing the F2 or DEL keys. In addition, it is totally necessary to make several previous configurations, such as checking in the BIOS / UEFI that the Wake on LAN we have activated, the operating system supports this type of technology and configuring it correctly, and, finally, configuring our router correctly. The process of configuring Wake on WAN is similar to configuring Wake on LAN, but we have to open a certain port on our router and redirect it to our PC that we want to open. Wake on WAN configuration to remotely turn on computers Once we have seen what Wake on WAN is, we are going to see how the complete configuration would be done to turn on your PC remotely. By having our computer only on when necessary, we can keep it off until we need it. Energy savings that will translate into a lower electricity bill.This is something very positive if at any time we are away from home or the office, and we want to access our files or use a program that we have on our computer. We can turn on the equipment from anywhere remotely, as long as we have an Internet connection.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |